Borgwarner New Performance STAGE 3 Hybrid Turbo R56 Mini Cooper S - Gen 2

  • £1,400.00
  • (Delivery from £21.00)
  • RRP £1,550.00
Item in Stock | Usually dispatched within 24 hours


  • Improved Throttle Response and mid to high end rev range Performance
  • Improved Boost and Spool Speeds
  • Push Much larger Volumes of air over stock Turbo
  • Will fit both JCW and Non JCW Engines N14 , N18
  • Suitable for heavily modified, stock or slightly modified Engines
  • Capable of 350 BHP
  • Bolts on without need for modified Exhaust manifold


Hybrid Compressor Wheel Upgrade

  • 7 Blade Compressor Wheel with Tail Profile
  • 42mm Inducer - Stock Turbo Non JCW (37.8 Inducer) JCW Turbo -  (41mm Inducer)
  • 56mm Exducer - Stock Turbo Non JCW (53.8mm Exducer) JCW Turbo - (54mm Exducer)

Hybrid Turbine Wheel Upgrade

  • 50.00mm Upgraded Turbine wheel - (Stock 44.9mm)
  • Cut Back Turbine Wheel
  • Machined Housing increasing volume
  • Upgraded 360 Thrust Bearing
  • Safe Up to 22 - 24 PSI
  • Capable of 2 Bar of Boost

If you are  looking for more power, greater air flow and a much more responsive throttle, then the STAGE2  hybrid turbo upgrade for the R56 cooper s turbo N14 and N18 is for you. With the far superior 7 blade compressor wheel the turbo will spool much quicker than the stock OEM and JCW mini turbos.

Current trends are seeing the use of 11 and 12 Blade compressor wheels but these wheels actually require ported shroud covers for them to work correctly.The borg warner turbos do not use ported shroud covers, hence the 11 and 12 blade compressor wheels are wasted.

Our Hybrid turbo has been specifically designed to ensure the very most in terms of performance and throttle response as well as making vast performance in the mid and top range.

 When combined with a Re map the hybrid turbo can open up some of the power potential that the R56 has to offer.

With a high flow cat and exhaust the power form the R56 can really come into its own allowing increased air into the engine along with exiting gasses flowing as freely as possible. 

The STAGE 3 hybrid turbo combined with opening up the intake restriction within the cylinder heas, a good valve job, exhaust system and re-map has seen over 350BHP at the wheel.

The key to good power in a turbo car is in the turbo!


FULL fitting Kit Included -

  • Exhaust outlet gasket, exhaust inlet gasket and studs and nuts


 At PRS Racing we don't want to charge any more than is necessary for the postage hence we charge by the weight of each product, helping to ensure cost effective shipping prices.
The following prices are based around quotes and can be subject to change. If this is the case PRS Racing reserve the right to contact you with any shipping amendments prior to shipping of your products to ensure 100% customer satisfaction. All prices are INCLUSIVE of VAT.

UK Delivery
0 - 0.49kg £1.99
0.5 - 0.99 kg £2.99
1kg - 2.99kg £5.00
3kg + (£10.50)

European Delivery
0 - 0.49kg £4.99
0.5 - 0.99 kg £5.99
1kg - 2.99kg £6.99
3kg + £20 (Weight Dependent)

Rest of World Delivery
0 - 0.49kg £9.99
0.5 - 0.99 kg £12.99
1kg - 2.99kg £14.99
3kg + £25.00 (Weight Dependent)

All Parcels are shipped with a tracking number to ensure you know when to expect your order. If you have supplied us with a contact number or e mail, you can txt to re arrange the delivery time and date

PRS are committed to keeping a large stock of goods, however we cannot always guarantee that all items will be in stock at time of purchase. If your item is not in stock we will contact you informing you when to expect your item.

PRS cannot be held liable for any reasonable or unavoidable loss or damage suffered as a result of a delay in delivery.

Please note if you are using paypal as your payment method and a refund is required a small fee of 20p will be deducted form the initial purchase price.