WHY CHANGE YOUR DUAL MASS MINI R53 STOCK OEM FLYWHEEL?
- Reduce Rotational Mass Your Stock Flywheel
- Increase Acceleration Throughout Entire Rev Range Stock Flywheel - 12kg
- TTV Flywheel - 5.6Kg
- Stock Flywheel - 12kg
- Improve Throttle Response
- Balanced light Weight Billet Steel Ensuring Prolonged Life
WHAT CAN BE GAINED FROM A LIGHT WEIGHT TTV MINI SINGLE MASS R53 REPLACEMNT FLYWHEEL?
If your running a standard stock OEM Flywheel then your loosing out on improved throttle response throughout the entire rev range. The BMW mini stock R53 OEM flywheel, is a large mass for the engine to turn reducing acceleration and engine uptake, retarding the performance of your BMW mini. 0-60 time.
Through simply fitting a flywheel, this will make any cooper S much more responsive and much quicker the minute the throttle is applied. The mini OEM stock flywheel weights in at Whopping 12kg unlike the TTV light weight performance flywheel which weights just a mere 5.6kg, that's less than half the rotational mass.
The lightened TTV Flywheel is manufactured from light weight billet steel ensuring strength whilst reducing overall mass and maintaining maximum performance. The flywheel is balanced to eliminate any harmonics and provide a smooth engine uptake whilst also allowing a direct replacement fit.
It can be fitted to the standard stock OEM clutch or a performance aftermarket clutch kit. The drive plate used MUST be sprung to help ensure that no clutch slip is generated. If an un sprung drive plate is used it will work but the clutch engagement wont be smooth.
Please Note: The TTV flywheel as been designed to fit OEM Clutch and pressure plate set up.